What is a hold harmless agreement?
A hold harmless agreement is a contract that decides in advance who pays when something goes wrong. One party, the indemnitor, promises to cover certain claims, losses, and legal costs so the other party, the indemnitee, doesn't carry them. The indemnitor is usually the side bringing the risk: the contractor on your roof, the vendor at your festival, the hunting club on your land, or the renter driving your truck.
You'll also see it called an indemnity agreement or an indemnification agreement. Lawyers sometimes argue over whether "hold harmless" adds anything to "indemnify." Most contracts use both words side by side, and ours does too, so the point rarely matters in practice.
The agreement does not stop an injured person from suing you. A guest who trips at your event can still name you in a lawsuit. What the agreement gives you is a contractual right to have the indemnitor defend that claim and pay the loss, within the limits you set.
Many hold harmless agreements also include a release. With a release, the indemnitor gives up its own right to sue you for its own injuries or damage. Without one, the indemnitor covers claims by others but could still bring a claim of its own. The builder lets you choose.
- Five agreement types, each with its own questions and clauses: contractor, event, property use, vehicle or equipment rental, and general
- One-way or mutual protection, with shared fault split by percentage in the mutual version
- A plain-English choice between limited, proportional, and broad protection, with the broad clause printed in bold capitals
- State warnings for construction anti-indemnity laws, releases of injury claims, and minors
- Optional release, assumption of risk, duty to defend, liability cap, and attorney fee terms
- Insurance terms for coverage types, minimum limits, additional insured status, and waiver of subrogation
- Parent or guardian block for minors, plus optional witness lines and notary acknowledgment
Types of hold harmless agreements
The builder starts by asking what the agreement is for, because a fence installer and a festival vendor face different risks. Each type adds its own section: scope of work and subcontractors for contractors, alcohol and setup rules for events, permitted use and restrictions for land, and condition and return terms for rentals.
Contractor Hold Harmless Agreement
A contractor or subcontractor takes on claims from its work on someone else's property, with license, safety, subcontractor, and insurance terms.
CreateEvent Hold Harmless Agreement
A participant, vendor, or organizer protects the event host or venue owner from injury and damage claims tied to the event.
CreateProperty Owner Hold Harmless Agreement
Someone using your land or premises for a set purpose covers injuries and damage they or their guests cause.
CreateVehicle and Equipment Rental Hold Harmless Agreement
A renter takes responsibility for the item, its return, and claims from its use, from cars and trailers to tools and event gear.
CreateGeneral Hold Harmless Agreement
Any other arrangement where one side, or both, wants the other to carry the cost of harm it causes.
CreateEvery type can be one-way or mutual. One-way is the usual choice when one side carries out the risky work or uses the other's property. Mutual fits when both sides bring people or property into the deal, such as two businesses sharing a site. In the mutual version each party covers the harm its own people cause, and shared fault is divided by percentage instead of being declared reciprocal and left vague.
When to use a hold harmless agreement
Use one whenever another person's activity could injure someone or damage property you'd be blamed for. Common examples:
- A homeowner or business hires a contractor for repairs, tree work, or installation jobs
- An organizer books a venue, or signs up vendors, performers, and participants
- A landowner allows hunting, filming, parking, storage, or a private gathering on the property
- A business or individual rents out a vehicle, trailer, power tools, heavy equipment, or tents and stages
- Two businesses share a workspace, a booth, or a project and want each to answer for its own staff
A hold harmless agreement is only as strong as the indemnitor's ability to pay. If the other side has no assets, your protection is on paper only. That's why most of these agreements also require liability insurance and name the protected party as an additional insured.
What every hold harmless agreement should include
A clear agreement names the parties, describes the activity precisely, and states exactly which losses move from one side to the other. Vague wording is the most common reason these clauses fail.
- Parties and direction: full legal names and addresses for each party, and whether protection runs one way or both ways.
- The activity: a specific description of the work, event, property use, or rental, with location and dates. "Install a 40-foot wooden fence along the rear property line" holds up better than "yard work."
- Covered losses: injury or death, property damage, theft, claims by guests and the public, attorney fees, fines, and losses from breaking the agreement.
- Fault rule: what happens when the protected party is partly or fully at fault. This one sentence decides most disputes.
- Carve-outs: gross negligence, willful misconduct, fraud, and violations of law, which most states will not let anyone shift.
- Defense and claims: whether the indemnitor must hire lawyers to defend claims, how fast claims must be reported, and when payment is due.
- Insurance: coverage types, minimum limits, additional insured status, and proof of coverage before the activity starts.
- Release and assumption of risk: optional terms in which the indemnitor gives up its own claims and confirms it understands the risks.
- Governing law and signatures: the governing state, a dispute method, and signature blocks, with a parent or guardian block when a minor takes part.
Limited, proportional, or broad protection
The builder asks one question that does more work than any other: if the protected party is partly or fully at fault, what happens?
- Limited: the indemnitor covers only losses it or its people cause. This is the safest choice in court and is allowed in every state.
- Proportional: the indemnitor covers all losses from the activity, minus the share the protected party causes. This tracks what construction lawyers call partial intermediate form.
- Broad: the indemnitor covers losses even when the protected party's ordinary negligence caused them. It gives the most protection, and it's the version courts and legislatures most often refuse to enforce.
When you choose broad, the builder names negligence expressly and prints the clause in a bold, capitalized block with a heading. That isn't decoration. Texas and Florida courts have refused to enforce own-negligence clauses that were buried in fine print or written in general terms.
How a hold harmless agreement works
Once signed, the agreement sits in the background until a claim arrives. Here is the usual sequence.
- A loss or claim happens. Someone is hurt, property is damaged, or a demand letter arrives.
- The protected party gives notice. It tells the indemnitor in writing within the deadline you set (10, 15, or 30 days) and sends copies of any papers. Late notice only reduces the indemnitor's duties if the delay actually hurt its defense.
- The defense starts. If you chose a duty to defend, the indemnitor hires and pays a lawyer, chosen as the agreement says, even if the claim turns out to be groundless.
- Settlement needs consent. Neither side can settle in a way that admits fault for the other, or that the other must pay for, without written consent.
- The indemnitor pays. Covered losses are due within the number of days you chose after a written demand with support.
- Protection outlasts the activity. Claims from events that happened while the agreement was in effect stay covered after it ends.
Sample hold harmless agreement
The sample below shows how a finished agreement is organized, from the parties and activity through the indemnity, carve-outs, insurance, and signature blocks.
State rules that change the outcome
Hold harmless agreements are mostly governed by court decisions, with statutes layered on top for construction work, minors, and releases. The tables below cover the rules most likely to change whether a clause holds up. They are not a 50-state survey.
Construction anti-indemnity statutes
| State | Rule | Source |
|---|---|---|
| Most states | About 45 states limit indemnity in construction contracts. All allow a contractor to cover its own negligence. Many void broad form, and a long list also voids coverage for any share of the protected party's negligence. | Matthiesen, Wickert & Lehrer 50-state survey (updated May 2026) |
| Texas | Voids construction indemnity for claims caused by the protected party's own negligence or fault. Indemnity for bodily injury or death of the indemnitor's own employees, or its subcontractors' employees, is an exception. | Tex. Ins. Code §§ 151.102, 151.103 |
| Florida | Indemnity for damage caused even partly by the protected party is void unless the contract has a dollar limit with a reasonable commercial relationship to the contract. When the owner is protected, the limit is at least $1 million per occurrence unless the parties agree otherwise. Gross negligence and willful misconduct are never covered. | Fla. Stat. § 725.06 |
| California | Voids construction indemnity for the protected party's sole negligence, willful misconduct, or design defects it supplied, with added limits on active negligence and residential projects. | Cal. Civ. Code §§ 2782, 2782.05 |
| New York | Voids construction indemnity for the protected party's own negligence, but indemnity limited to the contractor's share of fault survives. | N.Y. Gen. Oblig. Law § 5-322.1; Brooks v. Judlau Contracting, 11 N.Y.3d 204 (2008) |
Negligence wording, gross negligence, releases, and minors
| State | Rule | Source |
|---|---|---|
| Texas | Indemnity or a release covering the protected party's own negligence must say so expressly and be conspicuous, for example in capitals with a heading. | Ethyl Corp. v. Daniel Construction, 725 S.W.2d 705 (Tex. 1987); Dresser Industries v. Page Petroleum, 853 S.W.2d 505 (Tex. 1993) |
| Florida | Indemnity for the protected party's own negligence must be stated in clear and unequivocal terms. General phrases like "any and all claims" are not enough. | University Plaza Shopping Center v. Stewart, 272 So. 2d 507 (Fla. 1973); Charles Poe Masonry, 374 So. 2d 487 (Fla. 1979) |
| California | Contracts that excuse a party's fraud, willful injury, or violation of law are void. Waivers can also fail for services affecting the public interest. | Cal. Civ. Code § 1668; Tunkl v. Regents, 60 Cal. 2d 92 (1963) |
| Louisiana | A clause is null if it limits liability in advance for intentional or gross fault, or for causing physical injury to the other party. | La. Civ. Code art. 2004 |
| Montana | Contracts that exempt a party from its own fraud, willful injury, or violation of law are against public policy. Sport and recreation waivers follow a separate statute. | Mont. Code §§ 28-2-702, 27-1-753 |
| Virginia | Advance releases of personal injury claims are void as against public policy. | Hiett v. Lake Barcroft Community Ass'n, 244 Va. 191 (1992) |
| New York | Releases of negligence signed by paying users of pools, gyms, and similar recreational facilities are void. | N.Y. Gen. Oblig. Law § 5-326 |
| New Jersey, Washington | A parent's advance release of a child's injury claims is unenforceable (New Jersey: against commercial recreation operators). | Hojnowski v. Vans Skate Park, 187 N.J. 323 (2006); Scott v. Pacific West Mountain Resort, 119 Wn.2d 484 (1992) |
| Florida, Colorado | Parents may waive a child's claims only within statutory limits. Florida limits commercial waivers to inherent risks and requires a printed statutory notice. Colorado bars release of gross negligence and willful conduct. | Fla. Stat. § 744.301(3); C.R.S. § 13-22-107 |
Statutes and case law change. Confirm the current rule in your state before relying on any clause.
Two patterns run through these rules. First, the further a clause reaches into the protected party's own fault, the more precisely it has to be written. Second, no state reliably enforces a clause that excuses gross negligence or intentional harm. Our template carves those out in every version and adds a savings sentence, so a clause that goes too far is cut back to what the law allows instead of failing entirely.
A broad clause that works in one state can be void in the next, especially for construction work and for releases signed on behalf of children. Read the state warnings in the builder, keep the bold text in bold, and have a licensed attorney review large projects or high-risk activities. LawVault is a document service, not a law firm, and nothing on this page is legal advice.
How to create your hold harmless agreement
You can download the free blank template and fill it in yourself, or answer guided questions and let the builder assemble the agreement. The builder suits most people, because it adds the right type-specific clauses and flags state rules as you go.
- Pick the type and stateChoose contractor, event, property use, rental, or general, then the state whose law governs, usually where the work or activity happens.
- Decide who protects whomChoose one-way or mutual protection. For events, say whether a participant, vendor, or organizer is giving the protection.
- Enter the partiesAdd names, addresses, and business details for each side, any co-signers, and the related people the protection should also cover.
- Describe the activityExplain the work, event, use, or rental in specific terms, with dates, location, and known risks. Answer the questions for your type and add a minor's details if a child is taking part.
- Set the protection termsPick the covered losses, the fault rule, and whether to add a release, assumption of risk, duty to defend, claim deadlines, and a dollar cap.
- Add insurance and disputesSet coverage types and limits, additional insured status, and proof of coverage. Then choose what each side receives and how disputes are resolved.
- Review and signAdd any extra terms, witness lines, or a notary block, review the full agreement, and download it as a PDF or Word file for signing.
A good hold harmless agreement is specific about the activity, honest about who carries which risk, and backed by insurance. Build it before the work starts or the gates open, give each signer a copy, and keep the certificates of insurance with it so you can find everything quickly if a claim ever comes in.
Common questions
It is a contract in which one party, the indemnitor, agrees to absorb certain claims and losses so the other party, the indemnitee, does not have to. It often adds a release, where the indemnitor also gives up its own right to sue. LawDepot and LegalTemplates both treat hold harmless and indemnity agreements as the same product, and our template uses both words together.
In a one-way agreement only one side gives protection, usually the side doing the risky work or using the other side's property. In a mutual agreement each side covers the harm its own people cause, and when both are at fault the loss is split by percentage of fault. LegalTemplates describes these as unilateral and bilateral versions.
Not quite. A waiver (release) gives up the signer's own right to sue. A hold harmless agreement makes the signer cover claims brought by other people, plus related costs such as legal fees. Our builder lets you add a release to the indemnity, so one document can do both jobs.
Sometimes, but courts read these clauses strictly. Texas requires the intent to be stated expressly and printed conspicuously (Dresser Industries v. Page Petroleum, 853 S.W.2d 505 (Tex. 1993)). Florida requires clear and unequivocal wording (Charles Poe Masonry v. Spring Lock Scaffolding, 374 So. 2d 487 (Fla. 1979)). Many states bar it outright in construction contracts.
Generally no. California voids contracts that excuse fraud, willful injury, or violations of law (Civ. Code § 1668). Louisiana voids advance limits on liability for intentional or gross fault (Civ. Code art. 2004). Montana has a similar rule (Mont. Code § 28-2-702). Our template always carves these out, and no wizard option removes the carve-out.
Within limits. About 45 states have anti-indemnity statutes for construction work, according to a 50-state survey by Matthiesen, Wickert & Lehrer. Every state lets a contractor cover losses it causes. Many states void clauses that make a contractor pay for the owner's or general contractor's own negligence, and some also restrict additional insured requirements.
Usually not. It becomes binding when the parties sign, like most private contracts. Major form providers treat notarization as optional proof of identity, not a legal requirement. You can add witness lines or a notary acknowledgment in our builder if you want them.
A parent can sign, but many states will not enforce a parent's advance waiver of a child's injury claims. New Jersey (Hojnowski v. Vans Skate Park, 2006) and Washington (Scott v. Pacific West Mountain Resort, 1992) are examples. Florida and Colorado allow it only within limits set by statute (Fla. Stat. § 744.301(3); C.R.S. § 13-22-107).
Still unsure? Visit the help center.
Ways to get your hold harmless
Answer the questions and preview the finished document free. You pay only when you’re ready to download, print or e-sign it, and you can choose how.
Free 7-day trial subscription Cancel anytime
$49/mo $0 for one week
Unlimited access to 210+ legal documents for 7 days. After the trial it renews at $49 a month unless you cancel at least 24 hours before it ends.
Start 7-day trialPro, billed yearly
$9.99/moBest value · Save 80%
Unlimited documents and edits, e-signature for every party, and the freedom to amend and re-issue at any time. Billed $119.88 a year and renews annually. Cancel anytime.
Start annual planSingle document
$39One-time, no renewal
Unlock just this hold harmless: a permanent PDF download, printing, e-signature for every party and a tamper-evident audit trail, with no subscription.
Build this documentPrices in USD. Free blank templates stay free. Compare plans or read the refund policy.