What is a contractor hold harmless agreement?
A contractor hold harmless agreement is a promise by a contractor or subcontractor to cover claims that come out of its work on someone else's property. If a worker falls from a ladder, a delivery truck backs into a neighbor's car, or a trench floods the basement next door, the agreement says the contractor answers for it instead of the owner or general contractor.
It usually rides alongside a main construction contract, a purchase order, or a service agreement. The main contract covers price, schedule, and quality. This document covers who pays when someone gets hurt or something gets damaged. The builder links the two by title and date and says which one wins if they conflict on indemnity or insurance.
Construction is the one area where nearly every state has written statutes on this subject. That makes a contractor agreement different from an event or rental form: a clause that is perfectly normal elsewhere can be void the moment it touches a building project.
When to use one
Ask for a contractor hold harmless agreement before work starts whenever an outside crew will be on your property or under your general contract. Typical situations:
- A homeowner hires a roofer, electrician, tree service, or fence installer
- A property manager brings in lawn care, snow removal, or HVAC vendors
- A general contractor signs up subcontractors and suppliers on a commercial build
- A business hires a crew for a buildout, signage installation, or equipment move
Small jobs count too. A one-day gutter cleaning can still put a person on a ladder two stories up.
What it should include
- Scope of work: what the contractor will do, the materials and equipment it supplies, and the project address.
- Underlying contract: the title and date of the main contract, and which terms control on indemnity and insurance.
- Fault rule: whether the contractor covers only its own fault, a proportional share, or broader risk.
- Subcontractors: the contractor stays responsible for subs at every tier and must pass the same protection and insurance down to them.
- Licenses, permits, and safety: current licenses and permits for the work, and compliance with workplace safety rules.
- Insurance: commercial general liability, auto, and workers' compensation with minimum limits.
- Additional insured terms: additional insured status, primary and non-contributory coverage, and waiver of subrogation, where the state allows them.
- Dollar cap: a monetary limit where state law requires one, as Florida does.
- Claims procedure: notice deadlines, the duty to defend, settlement consent, and payment timing.
Limited, intermediate, and broad form
Construction lawyers sort these clauses into three forms. The builder uses plain labels for them, and the table shows how they line up.
Indemnity forms in construction
| Form | What the contractor covers | How states treat it |
|---|---|---|
| Limited (our "limited") | Only losses caused by the contractor and its people. | Allowed in every state. |
| Partial intermediate (our "proportional") | All losses from the work, minus the share caused by the protected party. | Survives in many states, including New York under Brooks v. Judlau. Voided in some states that bar any coverage of the protected party's negligence. |
| Full intermediate | The whole loss whenever the contractor is even partly at fault. | Voided in a long list of states, including California, New York, Texas, and Washington. |
| Broad (our "broad") | Losses even when the protected party is solely at fault. | The main target of anti-indemnity statutes. Voided in most states with a construction statute. |
Based on the Matthiesen, Wickert & Lehrer 50-state survey, updated May 2026. Verify your state before relying on it.
State rules that matter most
Key construction anti-indemnity rules
| State | Rule | Source |
|---|---|---|
| Texas | Voids construction indemnity for the protected party's own negligence or fault, with an exception for bodily injury or death claims by the contractor's own employees. Also limits the additional insured workaround. | Tex. Ins. Code §§ 151.102, 151.103, 151.104 |
| Florida | Indemnity reaching the protected party's fault needs a dollar cap tied to the contract and stated in the project documents. Owner protection runs at least $1 million per occurrence unless agreed otherwise. Public agency contracts are limited to the contractor's own fault. | Fla. Stat. § 725.06 |
| California | Voids indemnity for the protected party's sole negligence, willful misconduct, or design defects it supplied, with added limits for active negligence and residential projects. | Cal. Civ. Code §§ 2782, 2782.05 |
| New York | Voids indemnity for the protected party's own negligence. Indemnity limited to the contractor's share survives. | N.Y. Gen. Oblig. Law § 5-322.1; Brooks v. Judlau (2008) |
| Alabama, Maine, North Dakota, Vermont, D.C. | No general construction anti-indemnity statute listed. Ordinary contract rules on clear wording still apply. | MWL 50-state survey |
When you pick Contractor and a state, the builder checks your fault choice against these lists. If you choose broad form in a state that bans it, you'll see a strong warning to switch to limited or proportional. In Florida, the builder makes a dollar cap required for anything beyond limited form and adds the "reasonable commercial relationship" sentence to the cap clause. Remember that Florida also expects the cap to appear in the project specifications or bid documents.
Public projects often carry tighter limits than private ones, so the builder asks whether the job is residential, commercial, or public. Check the public contract's own indemnity terms as well; they may override anything you add.
The builder also offers an optional waiver of workers' compensation immunity. In some states an employer can only cover injury claims by its own workers if the contract waives that immunity expressly. Use it only after checking your state's rule.
A construction indemnity that goes further than the statute allows can be cut back or thrown out, and a dispute over it can cost more than the claim. Our savings sentence reduces an overreaching clause to what the law permits, but the safest course is to choose a form your state accepts from the start. LawVault prepares documents and does not act as anyone's lawyer, so have an attorney review large or public projects.
How to create your contractor hold harmless agreement
The builder opens with Contractor already selected, so the questions go straight to the job.
- Choose the statePick the state where the project is located. Its construction rules drive the warnings you'll see later.
- Set the directionMost owners choose one-way, with the contractor protecting them. Pick mutual if both sides will have crews on site.
- Enter the partiesAdd the contractor and the owner or general contractor, plus signers, notice addresses, and the related people to protect, such as employees and affiliates.
- Describe the jobEnter the project address, scope of work, project type, the main contract's title and date, subcontractor use, and license number.
- Pick the fault rule and termsChoose limited, proportional, or broad, then covered losses, duty to defend, claim deadlines, and a dollar cap if needed.
- Add insuranceRequire general liability, auto, and workers' compensation with limits, plus additional insured status and certificates before work starts.
- Review and signChoose a dispute method, review the full agreement, and download it as a PDF or Word file for both sides to sign.
A contractor hold harmless agreement works best when it matches the main contract, fits your state's statute, and is backed by real insurance certificates on file before the first tool comes off the truck.
Common questions
Yes, within limits. About 45 states have anti-indemnity statutes for construction work, according to the Matthiesen, Wickert & Lehrer 50-state survey. Every state lets a contractor cover losses it causes. Many void clauses that make it pay for the owner's or general contractor's own negligence.
Limited form covers only the contractor's own fault. Intermediate form covers losses where the contractor is at least partly at fault, either in full or scaled to its share. Broad form covers losses even when the protected party is solely at fault, and it is the version legislatures most often void.
Texas Insurance Code § 151.102 voids most construction indemnity for claims caused by the protected party's own negligence or fault. Section 151.103 still allows indemnity for bodily injury or death claims brought by the contractor's own employees or its subcontractors' employees.
Under Fla. Stat. § 725.06, indemnity for damage caused even partly by the protected party is void unless the contract sets a monetary limit with a reasonable commercial relationship to the contract and the limit is part of the project specifications or bid documents. When the owner is protected, the limit is at least $1 million per occurrence unless the parties agree otherwise.
Yes. New York voids construction indemnity for the protected party's own negligence (Gen. Oblig. Law § 5-322.1), but its highest court upheld indemnity limited to the contractor's share of fault in Brooks v. Judlau Contracting (2008).
No. They work together. The clause shifts responsibility, and the insurance gives a source of money to pay. Some states, including Kansas, Montana, and Texas, limit additional insured requirements in construction to the same extent they limit indemnity.
Still unsure? Visit the help center.
Ways to get your hold harmless
Answer the questions and preview the finished document free. You pay only when you’re ready to download, print or e-sign it, and you can choose how.
Free 7-day trial subscription Cancel anytime
$49/mo $0 for one week
Unlimited access to 210+ legal documents for 7 days. After the trial it renews at $49 a month unless you cancel at least 24 hours before it ends.
Start 7-day trialPro, billed yearly
$9.99/moBest value · Save 80%
Unlimited documents and edits, e-signature for every party, and the freedom to amend and re-issue at any time. Billed $119.88 a year and renews annually. Cancel anytime.
Start annual planSingle document
$39One-time, no renewal
Unlock just this hold harmless: a permanent PDF download, printing, e-signature for every party and a tamper-evident audit trail, with no subscription.
Build this documentPrices in USD. Free blank templates stay free. Compare plans or read the refund policy.