Step 1 of 7 · Getting started

Free Washington Lease Agreement Template

Your answers save as you go. Legal form tools, not legal advice.

Free template

Download a free Washington residential lease agreement template

Washington-labeled blank form with the jurisdiction set to Washington. The PDF is printable and the Word file is editable—no account or payment required. Review current state and local requirements and attach any required disclosures or addenda before signing.

Build a guided Washington version
Real EstateLast updated July 17, 20267 min read

What is a Washington residential lease agreement?

A Washington residential lease agreement is a contract between a landlord and tenant that sets the rent, term, deposit, and rules for a home in Washington. Most residential rentals fall under the Residential Landlord-Tenant Act, RCW Chapter 59.18.

Washington adds several rules on top of a typical lease. Landlords generally need a just cause listed in the statute to end a tenancy, rent increases are capped by state law, and a deposit can't be collected at all without a written lease and a signed move-in checklist. A clear written lease is the only practical way to meet those rules from day one.

Key features
  • Move-in condition checklist that RCW 59.18.260 requires before collecting a deposit
  • Deposit trust account and depository notice fields
  • Rent increase terms that respect the 90-day notice and the annual cap
  • Fire safety, mold, and landlord contact disclosures at signing
  • Free Washington PDF and Word templates, plus e-signature in the builder

Washington security deposit rules

Washington doesn't set a dollar cap on deposits, but it attaches strict conditions. A landlord may collect a deposit only if the rental agreement is in writing and states when the deposit can be withheld, and only if the landlord gives the tenant a written checklist describing the condition and cleanliness of the unit at the start of the tenancy. Both sides sign and date the checklist. A landlord who skips the checklist is liable for the full deposit.

The deposit goes into a trust account at a Washington financial institution or with a licensed escrow agent in the state. The tenant gets a written receipt and written notice of the depository's name and address.

At move-out, the landlord has 30 days after the tenancy ends and the tenant vacates to return the deposit or send a full and specific statement of the reasons for any deductions. Charges for damage must be supported by estimates, invoices, or receipts. Ordinary wear can't be deducted, and neither can damage to items that weren't recorded on the move-in checklist.

Washington security deposit rules

TopicRuleSource
Maximum depositNo statewide capRCW 59.18.260
PreconditionsWritten lease plus a signed move-in condition checklistRCW 59.18.260
Where it is heldTrust account at a Washington institution or licensed escrow agent; tenant told the depositoryRCW 59.18.270
Return deadline30 days after the tenancy ends and the tenant vacatesRCW 59.18.280
DeductionsFull, specific statement with estimates, invoices, or receipts; no charge for ordinary wearRCW 59.18.280
Intentional refusalCourt may award up to 2x the deposit, plus costs and attorney feesRCW 59.18.280

Rent, late fees, and payment in Washington

Washington gives tenants a five-day grace period. A landlord cannot charge a late fee if rent is paid within five days after the due date. Once rent is more than five days late, fees can be charged back to the day after the due date. The statute does not set a dollar or percentage cap, so state the fee in the lease and keep it reasonable (RCW 59.18.170). Tenants whose main income is a monthly government benefit that arrives after the due date can ask to move the due date by up to five days.

Rent increases are tightly controlled. No increase is allowed during the first 12 months of a tenancy. After that, rent can rise no more than 7% plus the Seattle-area CPI, or 10%, whichever is less, in any 12-month period. The Department of Commerce publishes the figure each year: 9.683% for 2026 and 10% for 2027. On $2,000 rent, the most a 2026 increase can add is $193.66. Every increase needs at least 90 days' written notice and can't take effect before the current term ends (RCW 59.18.140, 59.18.700).

Some properties are exempt from the cap under RCW 59.18.710, including units whose first certificate of occupancy is 12 years old or newer, certain owner-occupied homes and small multiplexes, and qualifying public or nonprofit housing.

Entry, repairs, and ending a tenancy in Washington

The landlord must keep the home fit to live in: comply with health and safety codes, keep structural parts, plumbing, heating, and electrical systems in working order, provide adequate locks, and supply heat, water, and hot water (RCW 59.18.060).

For entry, Washington sets a clear minimum. The landlord gives at least two days' written notice, or one day's notice to show the unit to buyers or prospective tenants. The notice must state the date and time (or a window with the earliest and latest times) and give a phone number the tenant can call to object or reschedule. Entry must be at reasonable times.

Washington entry and termination notice

SituationRuleSource
Landlord entry2 days written notice; 1 day for showings; emergencies exceptedRCW 59.18.150
Tenant ending a periodic tenancyWritten notice at least 20 days before the end of the rental periodRCW 59.18.200
Landlord ending a tenancyOnly for a just cause listed in the statute, with cause-specific noticeRCW 59.18.650
Unpaid rent14 days written notice to pay or surrenderRCW 59.12.030(3)
Lease violationNotice giving at least 10 days to complyRCW 59.18.650(2)(b)
Owner move-in or sale of a single-family home90 days' noticeRCW 59.18.650(2)(d), (e)

Victims of domestic violence, sexual assault, unlawful harassment, or stalking can end a lease with written notice and a protection order or a qualifying third-party record, as long as they ask within 90 days of the incident. They owe rent only through the month they leave and generally get the full deposit back (RCW 59.18.575).

Required Washington lease disclosures

At signing, a Washington landlord should hand over:

  • Fire safety and protection information. A notice covering smoke detection devices (hard-wired or battery) and, for buildings other than single-family homes, fire sprinklers, fire alarms, the smoking policy, and emergency plans. Both parties sign it (RCW 59.18.060).
  • Mold information. The Washington Department of Health's information on indoor mold hazards and control.
  • Landlord contact. The name and address of the landlord or managing agent, in the lease or a posted notice. Out-of-state landlords must name an in-county agent.
  • Move-in checklist and depository notice. Required whenever a deposit is collected.
  • Flood notice. For leases entered into after December 31, 2026, a disclosure about flood hazard areas and the need for renters and flood insurance (RCW 59.18.060).
  • Lead-based paint. For most homes built before 1978, the federal disclosure form, EPA pamphlet, and any known lead reports, kept for three years.
Check local rules

Washington cities and counties can add their own rules on top of state law, such as rental registration or inspection, relocation assistance (RCW 59.18.440), and local notice requirements. Check the city and county where the property sits, along with any HOA or housing program rules, before signing.

Types of lease agreement in Washington

Fixed-term lease

Runs for a set term with rent fixed until the end date. Just-cause rules still limit when a landlord can decline to continue it.

Create

Month-to-month lease

Continues until the tenant gives 20 days' notice or the landlord has a listed just cause and gives the required notice.

Create

Room rental agreement

Rents a room in a shared home. If the tenant shares a kitchen or bathroom with a resident owner, some rules, such as the rent cap, may not apply.

Create

Sublease agreement

Lets a tenant rent part or all of the unit to someone else, subject to the original lease terms on consent.

Create

What every Washington lease should include

  • Parties and property: legal names of every landlord and adult tenant and the full address.
  • Term: fixed dates or month-to-month terms.
  • Rent: amount, due date, payment methods, and the five-day grace period before any late fee.
  • Rent increases: a statement that increases follow the 90-day notice rule and the annual cap.
  • Security deposit: the amount, when it can be withheld, the trust account location, and the 30-day return rule.
  • Move-in checklist: signed and dated by both parties.
  • Entry: two days' notice, one day for showings.
  • Disclosures: fire safety, mold information, landlord contact, the flood notice for leases after 2026, and lead paint for pre-1978 homes.
  • Rules: pets, smoking, guests, parking, and utilities.
  • Signatures: every party signs and receives a copy.

How to create your Washington lease

LawVault's guided builder for Washington asks plain-language questions about the property, rent, deposit, and disclosures, then produces a lease you can preview and send for e-signature. If you'd rather work from a blank, download the free Washington template as a printable PDF or an editable Word file.

  1. Add the property and partiesEnter the Washington address and the legal names of every landlord and adult tenant.
  2. Set rent and the depositChoose the rent, due date, and late fee, then record the deposit and the trust account where it will be held.
  3. Complete the move-in checklistDescribe the condition of each room, fixture, and appliance so both sides can sign it.
  4. Attach Washington disclosuresAdd the fire safety notice, mold information, landlord contact details, and the lead paint form for pre-1978 homes.
  5. Review, sign, and downloadPreview the lease, collect e-signatures, and download PDF or Word copies.

LawVault is not a law firm and this page is not legal advice. Check the finished lease against the current RCW and your city's rules, and talk to a Washington attorney about disputes or unusual rentals.

Sample Washington lease agreement

Preview the document your answers produce — then build your own in minutes.

Build my lease

Common questions

Washington state law does not cap the deposit amount. A landlord can only collect a deposit if the lease is in writing and both sides sign a move-in condition checklist, and the money must be held in a trust account at a Washington financial institution or licensed escrow agent (RCW 59.18.260, 59.18.270).

The landlord has 30 days after the tenancy ends and the tenant moves out to return the deposit or send a full, specific statement of the reasons for keeping any of it, backed by estimates, invoices, or receipts. Intentionally refusing can cost up to twice the deposit (RCW 59.18.280).

For most covered tenancies, rent can rise by no more than 9.683% in any 12-month period during 2026, as published by the Department of Commerce. No increase is allowed in the first 12 months of a tenancy, and tenants must get at least 90 days' written notice (RCW 59.18.700, 59.18.140).

Two days' written notice is required for most entries, and one day's notice for showing the unit to buyers or new tenants. Emergencies are an exception (RCW 59.18.150).

A tenant must give written notice at least 20 days before the end of the rental period. Landlords, by contrast, can generally end a tenancy only for one of the just causes listed in RCW 59.18.650 (RCW 59.18.200).

Yes, the Washington PDF and Word templates are free to download. The PDF is a printable blank rather than a fillable form; use the Word file or the guided builder to type your terms.

Still unsure? Visit the help center.

Ways to get your lease

Answer the questions and preview the finished document free. You pay only when you’re ready to download, print or e-sign it, and you can choose how.

Free 7-day trial subscription Cancel anytime

$49/mo $0 for one week

Unlimited access to 210+ legal documents for 7 days. After the trial it renews at $49 a month unless you cancel at least 24 hours before it ends.

Start 7-day trial

Pro, billed yearly

$9.99/moBest value · Save 80%

Unlimited documents and edits, e-signature for every party, and the freedom to amend and re-issue at any time. Billed $119.88 a year and renews annually. Cancel anytime.

Start annual plan

Single document

$39One-time, no renewal

Unlock just this lease: a permanent PDF download, printing, e-signature for every party and a tamper-evident audit trail, with no subscription.

Build this document

Prices in USD. Free blank templates stay free. Compare plans or read the refund policy.

Build your lease in minutes

Preview the document your answers produce — then review, e-sign, or download it.

State-specific · E-sign ready · Legal form tools, not legal advice